The new goAardvark is here! Find out what's new.

goAardvark

PM schedule · Mini excavator

John Deere 35G maintenance schedule

Service intervals, fluids and filters for the John Deere 35G. Full specs, part numbers and heavy-duty intervals are in goAardvark.

  • Series G
Snapshot my fleet

Source: John Deere 35G Excavator Operator's Manual OMT333111 (PIN 1FF035GX__K270001-) · Last verified October 29, 2026 · Always confirm with the operator's manual for your serial number

What's due next?

Enter the hour meter (SMU) reading to see what's coming up.

hr
  • 1,000 hr service

    Includes 500 hr, 250 hr

    at 3,000In 160 hr
  • 250 hr service

    at 3,250In 410 hr
  • 500 hr service

    Includes 250 hr

    at 3,500In 660 hr
  • 250 hr service

    at 3,750In 910 hr

Shows the next four service stops. Red means due within 50 hours; amber, within 250. goAardvark tracks this automatically from telematics hours, across every make in your fleet.

The short answer

On the John Deere 35G, change the engine oil every 500 service hours.

Service intervals

Pick an interval. Each service includes everything from the shorter intervals that fall on the same hour.

Every day

0 of 9 done

Fluids and capacities 3 of 4 shown

SystemSpecCapacity
Engine oil (with filter)——
Hydraulic tank——
Travel gear case——
Cooling systemAvailable in goAardvarkAvailable in goAardvark

1 more systems with specs and capacities are in goAardvark.

Unlock full specs

Filters 2 of 6 shown

FilterPart numberChange at
Engine oil filterAvailable in goAardvark500 hr
Hydraulic tank oil filterAvailable in goAardvark500 hr
Primary fuel filter and water separatorAvailable in goAardvarkAvailable in goAardvark
Final fuel filterAvailable in goAardvarkAvailable in goAardvark
Pilot system oil filterAvailable in goAardvarkAvailable in goAardvark
Engine air filterAvailable in goAardvarkAvailable in goAardvark

All 6 filters with part numbers are in goAardvark.

Unlock full specs

Fleet PM snapshot

Add up to 5 machines to see when each one hits its next service. This is free and needs no sign-up.

MachineHours nowHours per weekNext serviceAround

1,000 hr at 3,000

160 hr
Dec 8
1 of 5 machines
This snapshot is out of date as soon as the machines run. If your John Deere 35G runs 52 hr a week instead of 40, its service lands around Dec 2. If it sits at 24 hr a week, around Dec 27. goAardvark reads real hours from Cat, Deere, Komatsu and Volvo telematics every day, so the dates stay right.
See it live with your fleetRequest a demo and we'll show these machines in goAardvark.

Official John Deere maintenance resources

Your 35G isn't the only machine due for service

Most fleets run several makes side by side. Each has its own manual, intervals and telematics portal. goAardvark pulls hours from all of them and builds one PM schedule for the whole fleet.

Compare similar mini excavators

Frequently asked questions

Every 500 service hours under normal operating conditions. Confirm the interval for your serial number in the operator's manual.

Sources

John Deere and other product names are trademarks of their owners. goAardvark is not affiliated with any equipment manufacturer. This page summarizes public information for planning; your operator's manual is the authority for your serial number.

Preventive maintenance · Field checklist

John Deere 35G PM checklist

Unit #
Serial number
Hour meter
Technician
Date

Daily

Service taskComponent
Check engine oil levelEngine
Check hydraulic tank oil levelHydraulics
Drain water and sediment from fuel tank sumpFuel
Drain primary fuel filter and water separatorFuel
Check engine coolant levelCooling
Check bucket teethLinkage
Check seat beltCab
Lubricate bucket and link pinsLinkage
Lubricate front end pin jointsLinkage

100 hr

Service taskComponent
Lubricate bucket and link pinsLinkage
Lubricate front end pin jointsLinkage
Check and adjust fan belt tensionEngine

250 hr

Service taskComponent
Lubricate swing bearingSwing
Check travel gear case oil levelUndercarriage
Drain water and sediment from hydraulic tankHydraulics
Take engine oil sampleEngine

500 hr

Service taskComponent
Change engine oil and filterEngine
Lubricate front end pin jointsLinkage
Lubricate swing bearing gearSwing
Lubricate control lever universal jointCab
Lubricate blade pinsLinkage
Replace primary fuel filter and water separatorFuel
Replace final fuel filterFuel
Replace hydraulic tank oil filterHydraulics
Take fluid samplesMachine

1,000 hr

Service taskComponent
Replace pilot system oil filterHydraulics
Change travel gear case oilUndercarriage
Check and adjust engine valve lashEngine
Check starter and alternatorElectrical

2,000 hr

Service taskComponent
Change hydraulic tank oilHydraulics
Drain, flush and refill cooling systemCooling

First 50 hr

Service taskComponent
Check and adjust fan belt tensionEngine

First 250 hr

Service taskComponent
Replace hydraulic tank oil filterHydraulics

When required

Service taskComponent
Clean radiator core and oil coolerCooling
Check and clean air cleaner dust unloader valveEngine
Replace engine air filterEngine
Check and adjust air conditioner beltIf equipped.Cab
Check and adjust track sagRubber or steel track.Undercarriage

Source: John Deere 35G Excavator Operator's Manual OMT333111 (PIN 1FF035GX__K270001-). Always confirm with the operator's manual for your serial number.